MS6D data logger

code: MS6D

The complete solution for monitoring of temperature, humidity and other values.

Included in delivery:

Data logger including the battery

Traceable calibration certificate. Calibration certificate contains calibration of 16 inputs 4-20mA, if it is not defined required configuration of inputs by the user. If required configuration of inputs is defined by the user, calibration certificate proves calibration of inputs in accordance with this required configuration - maximum one range for each of 16 inputs.
Calibration of other ranges is optional.
USB communication cable
Basic manual
Free basic Windows software is ready to download at folder Download

Features Technical Data Download Optional accessories We recommend

Features

Applications:

Server rooms, data centers
Food and beverages industry (HACCP)
Pharmaceutical industry (GMP)
Blood stations, pharmacies
Horticulture and cultivation of plants
HVAC - heating, ventilation, air conditioning, cooling
Building and energy management
Building automation
Research and development
Laboratories (GLP)
Main advantage - user configurable inputs from PC program without any need to open the data logger unit. Each data logger contains 16 inputs for measurement and record of both analog and two-state values. Each input is individually configurable from user PC program to one from 17 measuring ranges.
Also signals from sensors working on RS485 bus with ModBus or Advantech protocol can be recorded.
Universal sixteen channel data logger is designed for data acquisition from sensors of variety values, alarm state indication, optionally for control of consecutive processes.
Data is possible to download to the PC via USB, RS232, Ethernet interfaces or GSM modem for processing.
Free program for monitoring system for Windows is ready to download.

Data logger enables to:
- Configure inputs for different input signal types from the PC program.
- Individully configure each input channel for measurement, alarm evaluation and data logging , including individual logging interval for each input.
- Individually program each input channel for different modes of record (continuous record, time dependent record, record only if specified logic conditions are matched, record triggered by external signal, etc.).
- Set up to four different logic conditions for each channel to active alarm. Each condition compares measured values from inputs with set limits. It is possible to set hysteresis and delay of condition validity.
- Indicate alarm state after matching defined combination up to four alarms from any inputs.
- Activate selected relays depending on alarm states by means of output relays module.
- Monitor online data by means of the Ethernet interface and Comet DBM program receiving SOAP messages.
- Receive information from monitoring system by means of SMS messages via GSM modem - actual values, alarms, memory occupation etc.
- Assign to each input channel name of actual recorded process to identify monitored object (e.g. type of monitored product). It is enabled to select this name from data logger keyboard during the operation.
Each data logger input can be configured by the user from PC program depending on input signal character for measurement of dc current and voltage of different ranges, signals from RTD temperature sensors and thermocouples or dual-state signals with parameters in accordance with the table.
Inputs are not galvanically isolated from each other.

PARAMETERS OF CONFIGURABLE INPUTS
Measured value	Accuracy	Note
dc current 4 to 20 mA	±0.1% FS (±0.02mA)	either from active source connected between COM and GND terminals or passive sensor connected between terminals +24V and COM
dc voltage -10V to +10V	±0.1% FS (±10 mV)	input resistance approximately 10 Mohms, input terminals IN and COM
dc voltage -1V to +1V	±0.1% FS (±1 mV)	input resistance approximately 10 Mohms, input terminals IN and COM
dc voltage -100mV to +100mV	±0.1% FS (±100 uV)	input resistance approximately 10 Mohms, input terminals IN and COM
dc voltage -18mV to +18mV	±0.1% FS (±18 uV)	input resistance approximately 10 Mohms, input terminals IN and COM
thermocouple K (NiCr-Ni) -200 to +1300°C	±0.3% from reading + 1.5°C	linearized, cold junction compensation, input terminals IN and COM
thermocouple N (NiCrSi-NiSiMg) -200 to +1300°C	±0.3% from reading + 1.5°C	linearized, cold junction compensation, input terminals IN and COM
thermocouple J (Fe-Co) -200 to +750°C	±0.3% from reading + 1.5°C	linearized, cold junction compensation, input terminals IN and COM
thermocouple S (Pt10%Rh-Pt) 0 to +1700°C	±0.3% from reading + 1.5°C	linearized, cold junction compensation, input terminals IN and COM
thermocouple B (Pt30%Rh-Pt) +100 to +1800°C	±0.3% from reading + 1.0°C from +300 to +1800°C	linearized, without cold junction compensation, input terminals IN and COM
thermocouple T (Cu-CuNi) -200 to +400°C	±0.3% from reading + 1.5°C	linearized, cold junction compensation, input terminals IN and COM
Platinum temperature sensor Pt100 -200 to +600°C	±0.2°C from -200 to +100°C ±0.2% from reading from +100 to +600°C	two-wire connection, measuring current approximately 0.8mA in pulse 50ms, input terminals IN and COM
Platinum temperature sensor Pt1000 -200 to +600°C	±0.2°C from -200 to +100°C ±0.2% from reading from +100 to +600°C	two-wire connection, measuring current approximately 0.5mA in pulse 50ms, input terminals IN and COM
Nickel temperature sensor Ni1000/6180ppm -50 to +250°C	±0.2°C from -50 to +100°C ±0.2% from reading from +100 to +250°C	two-wire connection, measuring current approximately 0.5mA in pulse 50ms, input terminals IN and COM
two-wire measurement of resistance 0 to 300 Ohms	0.1% FS (±0.3 Ohms)	measuring current approximately 0.8mA / 50ms, input terminals IN and COM
two-wire measurement of resistance 0 to 3000 Ohms	0.1% FS (±3 Ohms)	measuring current approximately 0.5mA / 50ms, input terminals IN and COM
two-wire measurement of resistance 0 to 10000 Ohms	0.1% FS (±10 Ohms)	measuring current approximately 0.1mA / 50ms, input terminals IN and COM

Binary input for two-state signal	input voltage for state "L" (IN-COM) < 0.8 V (Rin < 1 kOhm). resistance of closed contact for state "L" (IN-COM) < 1 kOhm. input voltage for state "H" (IN-COM) > 2 V. resistance of closed contact for state "H" (IN-COM) > 10 kOhm. minimum duration for sensing of change: 200ms.
RS485IN - input for serial signal RS485 - optionally	E.g. data acquisition from temperature, humidity, pressure sensors Tx41x, Hx43x. input serves for reading from devices supporting protocol ModBus RTU or Advantech. Connected to terminals next to terminals for channel 15 and 16. Input can work with 16 devices. Maximum speed 115200Bd. Galvanically isolated.

OPTIONAL

Monitoring system input - label Monitoring system inputs

Figure: data logger inputs with switch for selection of power voltage 12Vdc/24Vdc for connected sensors. Serial input RS485IN is optional.

OPTIONAL

Figure: communication interface, alarm outputs, connection of power. Ethernet interface is optional.

Features of Ethernet interface:

Ethernet interface

Data logger is designed for connection to standard computer network. The 10 and 100Mb/s Ethernet is supported.No need to build new data lines. Thanks this installation cost are essentially reduced and instant easy start of monitoring system operation is enabled.

Modbus RTU Modbus protocol

Enables to read actually measured values by means of industrial standard Modbus. Data is available in several formats. Protocol is suitable for implementing of MS data logger to SCADA system.

SNMPv1 protocol

Actually measured values can be acquired by means of SNMPv1 protocol. MIB tables are available for free.

Designed especially for IT applications and use in “managed” computer networks.

Fast data download Fast data download

Record download speed was increased four-times from previous MS5 data logger generation.

SOAP protocol

Protocol designed for data logger integration to own www infrastructure. Available actual values can be captured by www server (Apache, IIS) and processed by the user.Communication protocol SOAP version 1.1. is supported. By means of this protocol data logger sends actual values in preset intervals to specified server.

Syslog Syslog protocol

Syslog message is sent after alarm state or data logger error appears. Syslog is compatible with RFC5424.

E-mail

Data logger sends warning emails up to three different addresses. E-mail is immediately sent after alarm state of monitored technological process appears. User is also informed on error states of device itself (measuring channel error, fulfilling of internal memory, self-test error).
SMTP servers requiring autentization are also supported.

XML file XML file

Actual values can be downloaded to XML file. This option is suitable for data logger integration to SCADA systems.

Display Data logger display

Network parameters can be set directly from data logger display. It is possible to change IP address, subnetwork mask and initial gate.

Secured WEB server

WWW server is built in the device. Here it is possible to monitor actual values, alarm states and information on data logger.Also access password for www pages can be entered. WWW pages are user modifiable. Free SDK description is available to create own www pages.

SNMP Trap

SNMP Traps are sent after alarm state or device error appears.

Database system

Prepared for connection to database system including online values transfer.

Remote conditions WWW remote conditions

Control of remote condition and relays is enabled also via www interface.

DIFFERENCES IN FEATURES OF DATA LOGGERS MS6D AND MS55D
Feature	MS6D	MS55D
Character of inputs:	inputs configurable by the user from PC program	fixed - depends of installed HW input modules
Maximum measured dc current:	20 mA dc	5 A dc
Maximum measured dc voltage:	10 V dc	75 V dc
Most sensitive measuring range of dc voltage:	18 mV dc	100 mV dc
Maximum measured ac voltage:	-	50 V ac
Maximum measured ac current:	-	5 A ac
Input for measurement of frequency:	-	0 to 5 kHz
Input for counting of pulses:	-	yes
Possibility of galvanical isolation of inputs:	only serial input RS485IN, analog inputs cannot be isolated	yes
SMS port for sending/reception of SMS:	included	included
Dimensions including connectors:	215 x 225 x 44 mm	215 x 225 x 60 mm

Technical Data

Technical parameters	Value
Total memory capacity	2MB (up to 480 000 values)
Memory type	internal SRAM, backed-up by Lithium battery
Data logging modes	noncyclic - logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new
Data logging interval	adjustable individually for all input channels from 1 second to 24 hours
Real time clock	year, leap year, month, day, hour, minute, second, backed-up by Lithium battery
Resolution of the AD converter (analog channels)	16 bits, conversion duration approximately 60ms/channel
Communication speed	9600, 19200, 57600, 115200 Bd, 230400* Bd (* applicable for USB, Ethernet)
Power	24Vdc, consumption of data logger itself approximately 80 mA
Operating temperature range	0 to +50°C
Dimensions including connectors	215 x 225 x 44 mm (W x D x H)
Protection	IP20
Weight	approximately 800 g
Warranty	2 years

	size
Basic Instruction Manual	2.3 MB
Appendix to Instruction Manual	3.1 MB
Declaration of Conformity	30 kB
Datasheet	2.2 MB
Monitoring System setup wizard step by step - powerpoint presentation	4 MB
MIB tables	250 kB

Program for MS Data Loggers, Code: SWR006	more »
SWR006 Program for Data Loggers version 3.0.0.15	46.9 MB

DBM MS Logger Program - database software for MS data loggers, Code: DBM	more »
DBM MS Logger Program version 3.0.0.17_II	99.6 MB

DBV Database Viewer for database programs DBL, DBM, DBS, Code: DBV	more »
DBV Database Viewer 2.3.0.1	22.8 MB

Optional accessories

Power/Backup adapters Fixing MS Communication/convertors GSM/Wi-Fi communication External display Relay module Other accessories Higher protection Temperature Probes Monitoring software

Ac/dc adapter 21V/1A/25W unstabilized code: A1759	AC/DC adapter 230Vac to 24Vdc/1A, switch-mode code: A1940	Power supply 24Vdc for DIN 35mm rail code: A5948
Uninterruptible power supply MIN-DC-UPS/24VDC/2 code: A6963	Rechargeable battery module MINI-BAT/24DC/1,3AH code: A7963	DIN rail 35mm/226mm lenght with screws code: MP035
Uninterruptible power supply unit AWZ 224 code: A6966	Rechargeable hermetic battery 12V/7,2Ah code: A7966

Holders for data logger mounting to DIN 35mm rail

code: MP012

Universal holders for data logger and output relays module

code: MP013

Side covers for cables

code: MP027

Ethernet communication port (internal) for MS6R, MS6D code: MP042	Converter RS232/RS485 with ac/dc adapter for MS5 code: MP021	Converter USB/RS485 for MS5 code: MP022
Converter RS232/485/422 to 10/100Base-TX with ac/dc adapter for MS code: MP023	RS232 connector with terminals code: MP030	Galvanically isolated input for MS data loggers for serial RS485 signal code: RS485IN

GPRS/EDGE router ER75i RS232 set

code: MP052

KIT-GSM modem Fastrack Xtend

code: KIT-GSM-M

TP-LINK-TL WA5110G wifi adapter

code: TP-LINK-TL

Terminal with display for MS55, MS6 code: MP016	External terminal for MS5 with housing and cable code: MP032	Communication cable for ext. terminal or output relays module 60cm code: MP017
Communication cable for ext. terminal or output relays module 5m code: MP017-5	Communication cable for ext. terminal or output relays module 10m code: MP017-10

Output relays module code: MP018	Holders for output relays module mounting to DIN 35mm rail code: MP019	DIN rail 35 mm for output relays module with screws code: MP020
Communication cable for ext. terminal or output relays module 60cm code: MP017	Communication cable for ext. terminal or output relays module 5m code: MP017-5	Communication cable for ext. terminal or output relays module 10m code: MP017-10

external audio unit for MS5 dataloggers code: MP026	Power detector SP008 code: SP008	Screwdriver for WAGO terminals 3.5mm code: MP031
Magnetic door contact SA-200-A code: SA200A	Magnetic door contact with cable length 2m code: SA200A-2	Magnetic door contact with cable length 5m code: SA200A-5
Magnetic door contact with cable length 10m code: SA200A-10	Magnetic door contact with cable length 15m code: SA200A-15	Magnetic door contact with cable length 20m code: SA200A-20
Magnetic door contact with cable length 30m code: SA200A-30

MS6D datalogger in IP54 protection case with connected terminal at the lid

code: MP048

Watertight case with wall holders and holders for data logger, no cutout in the lid

code: MP033

GD1250 thermocouple "K" wire probe 1m code: GD1250-1/0	GD1250 thermocouple "K" wire probe 2m code: GD1250-2/0	GD1250 thermocouple "K" wire probe 3m code: GD1250-3/0
GD1250 thermocouple "K" wire probe 4m code: GD1250-4/0	GD260 thermocouple "K" wire probe 1m code: GD260-1/0	GD260 thermocouple "K" wire probe 2m code: GD260-2/0
GD260 thermocouple "K" wire probe 3m code: GD260-3/0	GD260 thermocouple "K" wire probe 4m code: GD260-4/0	GD700 thermocouple "K" wire probe 1m code: GD700-1/0
GD700 thermocouple "K" wire probe 2m code: GD700-2/0	GD700 thermocouple "K" wire probe 3m code: GD700-3/0	GD700 thermocouple "K" wire probe 4m code: GD700-4/0
Pt1000TG8/0, cable 1 m code: SN104	Pt1000TG8/0, cable 2 m code: SN105	Pt1000TG8/0, cable 5 m code: SN108
Pt1000TG8/0, cable 10 m code: SN113	Pt1000TR050/0 1m Temperature probe code: SN132	Pt1000TR050/0 2m Temperature probe code: SN133
Pt1000TR050/0 5 m Temperature probe code: SN136	Pt1000TR050/0 10 m Temperature probe code: SN141	Pt1000TG7/0, cable 1 m code: SN164
Pt1000TG7/0, cable 2 m code: SN165	Pt1000TG7/0, cable 5 m code: SN166	Pt1000TG7/0, cable 10 m code: SN167
2301-220/0, cable 1 m code: SN168	2021-150/0, cable 1 m code: SN169	PTS350A-2/0, cable 2 m code: SN170
2031-150/0 Temperature probe code: SN175	2061-200/0 1m Temperature probe code: SN178	2061-200/0 2m Temperature probe code: SN179
2061-200/0 5m Temperature probe code: SN180	2061-200/0 10m Temperature probe code: SN181	PTS350A-5/0, cable 5 m code: SN182
PTS350A-10/0, cable 10 m code: SN183	Pt1000TGL40/0, cable 1 m code: SN185	Pt1000TGL40/0, cable 2 m code: SN186
Pt1000TGL40/0, cable 5 m code: SN187	Pt1000TGL40/0, cable 10 m code: SN188	Pt1000TR160/0, cable 1 m code: SN199
Pt1000TR160/0, cable 2 m code: SN200	Pt1000TR160/0, cable 5 m code: SN201	Pt1000TR160/0, cable 10 m code: SN202
Pt1000TR160/0, cable 15 m code: SN203	Pt1000TR160/0, cable 20 m code: SN204	PTS380K temperature sensor with a stainless steel connection head and connector code: SN205
2091-200/0 Stick-in probe, cable 1m code: SN210	2091-200/0 Stick-in probe, cable 2m code: SN211	2091-200/0 Stick-in probe, cable 5m code: SN212
2091-200/0 Stick-in probe, cable 10m code: SN213	2071-030/0 Special probe with CINCH connector code: SN214	Extension cable thermocouple K with female connector, 1meter length code: SNP03/0
Extension cable thermocouple K with female connector,2meters code: SNP06/0	Extension cable thermocouple K with female connector,3meters code: SNP07/0	Extension cable thermocouple K with female connector,4meters code: SNP08/0
Extension cable thermocouple K with female connector,5meters code: SNP09/0	Extension cable thermocouple K with female connector,6meters code: SNP10/0	Extension cable thermocouple K with female connector,7meters code: SNP11/0
Extension cable thermocouple K with female connector,8meters code: SNP12/0	Extension cable thermocouple K with female connector,9meters code: SNP13/0	Extension cable thermocouple K with female connector,10meters code: SNP14/0
Extension cable thermocouple K with female connector,11meters code: SNP15/0	Extension cable thermocouple K with female connector,12meters code: SNP16/0	Extension cable thermocouple K with female connector,13meters code: SNP17/0
Extension cable thermocouple K with female connector,14meters code: SNP18/0	Extension cable thermocouple K with female connector,15meters code: SNP19/0

DBM MS Logger Program - database software for MS data loggers

code: DBM

DBV Database Viewer for database programs DBL, DBM, DBS

code: DBV

Program for MS Data Loggers

code: SWR006

	DBM MS Logger Program - database software for MS data loggers code: DBM Database program package.
	DBV Database Viewer for database programs DBL, DBM, DBS code: DBV Low cost browser DBV Database Viewer enables several clients to view database from different places on network/internet.
	Program for MS Data Loggers code: SWR006 Program for Windows - comfort graphic environment data acquisition, including online graph, automatic data download, remote Display mode on Internet-Ethernet network, storing data on the network, administration of users and passwords.
	MS6-Rack data logger code: MS6-Rack The complete solution for monitoring of temperature, humidity and other values. For mounting to 19" rack - one rack unit 1U. Enables to build in the optional MP016 output relays module with 16 relays - see Optional accessories.
	MS6R data logger code: MS6R The complete solution for monitoring of temperature, humidity and other values. For desktop use with rubber feet - see Optional accessories. For mounting to 19" rack - one rack unit 1U.
	MS55D data logger code: MS55D The complete solution for monitoring of temperature, humidity and other values.

MS6D data logger

Features

Data logger enables to:

Technical Data

Optional accessories