Thermometer

code: R0110

Thermometer is designed for record of temperature. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.

Included in delivery:

Data logger including the battery
Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
Quick start manual
Free basic Windows software is ready to download at folder Download

For communication with the PC must be from Optional accessories ordered USB adapter, LAN adapter or COM adapter or start/stop magnet if is needed to control logging the other way than directly from computer.

Features Technical Data Download Optional accessories We recommend

Features

Main thermometer applications:

Transport of food or pharmaceuticals
Food and beverage industry (HACCP)
Pharmaceutical industry
Blood stations, pharmacies
Horticulture and cultivation of plants
HVAC (heating, ventilation, air conditioning, cooling)
Building and energy management
Research and development
Laboratories (GLP)
Warehouses
Technological processes
Museums, archives, galleries
TÜV SÜD certified to conform to EN 12830,
Class 1 and EN 13486, Class 1 for the transport of food

Thermometer advantages:

included traceable calibration certificate from the manufacturer - Comet
fast data transfer to the PC (full memory for approximately 30s)
variability of connection to the computer - USB, RS232, Ethernet, GSM modem
permanent connection to the PC enabled, data is possible to download even during logging
large data memory 32000 values
optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)
dual level alarm is enabled for each channel, alarm is indicated by blinking of the LED diode
two alarm modes are enabled: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared from the PC)
robust watertight case
easy installation, locking enabled
low power consumption from battery, battery life up to 7 years
indication of remaining battery life, easy replacement of the battery
it is possible to combine temperature measurement with logging of contact state (e.g. door contact)
logging start/stop is enabled in several ways: at certain time and date programmed from computer, by delivered magnet
also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits
each logger is possible to describe with text of maximum 32 characters
each channel is possible to describe with text of maximum 16 characters
password protection is enabled to prevent unauthorized manipulation with logger

GSM COMMUNICATION - read more

Technical Data

Technical parameters	Value
Measured Value	Temperature
Construction Type	Ambient Air
Temperature Measuring Range	-40 to +80°C
Two-State Input	No
Lcd Display	No
Built-In Printer	No
Operating temperature range	-40 to +80°C
Accuracy of temperature measurement	±0.4°C
Resolution of the reading	0.1°C
Real time clock	year, leap year, month, day, hour, minute, second
Data logging interval	adjustable from 10s to 24h
Alarm refresh	each 10 s
Total memory capacity	32000 temperature values in noncyclic logging mode
Data logging mode	noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new
Power	Lithium battery 3,6V, size AA
Typical battery life	7 years
Battery life in continuous on-line mode with interval 1 minute	reduced to 70% of the above life
Battery life in continuous on-line mode with interval 10 second	1 year
IP protection	IP67 - protected against influence of temporary immersion into water
Dimensions	93x64x27mm
Weight including battery	approximately 100g
Warranty	2 years

	size
Instruction Manual	210 kB
Datasheet	790 kB
Declaration of Conformity	60 kB

Program for Data Loggers Sxxxx, Rxxxx, Gxxxx, Dxxxx, Code: SWR004	more »
SWR004 Program for Data Loggers version 3.0.0.15	13.6 MB

DBL Logger Program - database software for Sxxxx, Rxxxx, Gxxxx data loggers, Code: DBL	more »
DBL Logger Program version 3.0.0.17.II	61.8 MB

DBV Database Viewer for database programs DBL, DBM, DBS, Code: DBV	more »
DBV Database Viewer 2.3.0.1	22.8 MB

Optional accessories

GSM communication Other accessories Monitoring software

KIT - GSM/GPRS modem LP040 with accessories for Sxxxx, Rxxxx loggers code: KIT-GSM-L	COM adapter with protection IP65 code: LP012	GSM/GPRS MODEM for data loggers of Sxxxx, Rxxxx, Gxxxx families code: LP040
antenna for GSM modem FASTRACK code: MP009/1	AC/DC adapter 230Vac to 24Vdc/1A, switch-mode code: A1940	Backup power supply for GSM modem LP040 code: BP12
Communication cable for GSM modem code: QMS2901	Transducer USB/RS232 complete code: MP006	Self Adhesive Dual Lock code: MD036
Wall holder for GPRS modem code: MP036	DIN Rail 35mm holder for GPRS modem code: MP037	One time fee for using M2M server - applied for each data logger with modem code: SLU302

Start/stop magnet code: LP004	USB adapter code: LP003	COM adapter with protection IP65 code: LP012
LAN adapter with 0.5 meter cable code: LP005	LAN adapter with 5 meter cable code: LP005-5	Lithium battery 3,6V/AA code: A4203
wall holder for datalogger code: F9000	Self Adhesive Dual Lock code: MD036

DBL Logger Program - database software for Sxxxx, Rxxxx, Gxxxx data loggers

code: DBL

DBV Database Viewer for database programs DBL, DBM, DBS

code: DBV

Program for Data Loggers Sxxxx, Rxxxx, Gxxxx, Dxxxx

code: SWR004

	DBL Logger Program - database software for Sxxxx, Rxxxx, Gxxxx data loggers code: DBL Database program package.
	DBV Database Viewer for database programs DBL, DBM, DBS code: DBV Low cost browser DBV Database Viewer enables several clients to view database from different places on network/internet.
	Program for Data Loggers Sxxxx, Rxxxx, Gxxxx, Dxxxx code: SWR004 Program for Windows for data loggers of Rxxxx, Sxxxx, Gxxxx, Dxxxx, ZV families.
	LAN adapter with 0.5 meter cable code: LP005 LAN adapter - external converter for Sxxxx, Rxxxx loggers communication with the PC via Ethernet, including ac/dc adapter 100 to 240Vac/5Vdc. Length of the cable 0.5 m. Protection IP65. Exceeding of adjusted limits is alarmed by sending e-mail message or SNMP trap.
	Thermometer with display code: S0110 Thermometer is designed for record of temperature. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.
	Thermometer for external probe with display code: S0111 Thermometer is designed for record of temperature. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.
	T-PRINT G0221E temperature recorder with printer code: G0221E ■ print-out of temperature record during transport of food, pharmaceuticals, flowers, live animals and other goods ■ designed especially for installation in driver´s cabin ■ easy installation
	T-PRINT - temperature recorder with printer for semi-trailer code: G0841 • print-out of temperature record during transport of food, pharmaceuticals, flowers, live animals and other goods • designed specifically for external installation on semi-trailers