dual chann. 0-20mA current datalogger with display

code: S6021

Data logger is designed for record of current. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.

Included in delivery:

Data logger including the battery
Traceable calibration
Quick start manual
Free basic Windows software is ready to download at folder Download

For communication with the PC must be from Optional accessories ordered USB adapter, LAN adapter or COM adapter or start/stop magnet if is needed to control logging the other way than directly from computer.

Features Technical Data Download Optional accessories We recommend

Features

Main applications of data logger:

Distant places with no electric power
Long term field measurement
Research and development
Laboratories
Technological processes

Advantages of data logger:

included traceable calibration certificate from the manufacturer - Comet
fast data transfer to the PC (full memory for approximately 30s)
variability of connection to the computer - USB, RS232, Ethernet, GSM modem
permanent connection to the PC enabled, data is possible to download even during logging
large data memory 32000 values
large dual line display with special symbols, switchable
optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)
dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display
two alarm modes are enabled: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared)
robust watertight case
easy installation, locking enabled
low power consumption from battery, battery life up to 6 years
indication of remaining battery life, easy replacement of the battery
logging start/stop is enabled: at certain time and date programmed from computer, by external binary signal or by delivered magnet
also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits
input signal is recalculated and displayed in real measured physical units by means of the PC software
each logger is possible to describe with text of maximum 32 characters
each channel is possible to describe with text of maximum 16 characters
password protection is enabled to prevent unauthorized manipulation with logger

GSM communication

GSM COMMUNICATION - read more

Technical Data

Technical parameters	Value
Measured Value	Current
Operating temperature range	-30 to +70°C
Measurement accuracy	±0.2% FS
Resolution of current input	7900 levels
Signal character at binary input	from potential-less contact or two-state voltage signal
Minimum pulse duration at binary input	500 ms (shorter pulses may not be recorded)
Maximum frequency at binary input	0.5 Hz (i.e. maximum 5 pulses for 10 s)
Power current through contact at binary input	3 uA (contact closed)
Voltage accross open contact at binary input	maximum 3.6 V
Low voltage level at binary input	0 to +0.2 V (maximum current from the input 3 uA)
High voltage level at binary input	+3.0 to +30 V (maximum current to the input 100 nA)
Built-in connector for input signals	D-Sub 9 pins, male
Real time clock	year, leap year, month, day, hour, minute, second
Data logging interval	adjustable from 10s to 24h
Display and alarm refresh	each 10s
Total memory capacity	32 504 records in noncyclic logging mode, 28 896 records in cyclic logging mode
Data logging modes	noncyclic - data logging stops after filling the memory cyclic - after filling memory oldest data is overwritten by new
Power	Lithium battery 3,6V, size AA
Typical battery life in low-power mode (1 minute sampling)	6 years
Battery life in continuous on-line mode with interval 1 minute	4 years
Battery life in continuous on-line mode with interval 10 second	1 year
IP protection	IP67 - protected against influence of temporary immersion into water
Dimensions without connectors	93x64x29mm
Weight including battery	approximately 130g
Warranty	2 years

	size
Instruction Manual	550 kB
Datasheet	1.1 MB
Declaration of Conformity	60 kB

Program for Data Loggers Sxxxx, Rxxxx, Gxxxx, Dxxxx, Code: SWR004	more »
SWR004 Program for Data Loggers version 3.0.0.15	13.6 MB

DBL Logger Program - database software for Sxxxx, Rxxxx, Gxxxx data loggers, Code: DBL	more »
DBL Logger Program version 3.0.0.17.II	61.8 MB

DBV Database Viewer for database programs DBL, DBM, DBS, Code: DBV	more »
DBV Database Viewer 2.3.0.1	22.8 MB

Optional accessories

GSM communication Other accessories Monitoring software

KIT - GSM/GPRS modem LP040 with accessories for Sxxxx, Rxxxx loggers code: KIT-GSM-L	COM adapter with protection IP65 code: LP012	GSM/GPRS MODEM for data loggers of Sxxxx, Rxxxx, Gxxxx families code: LP040
antenna for GSM modem FASTRACK code: MP009/1	AC/DC adapter 230Vac to 24Vdc/1A, switch-mode code: A1940	Backup power supply for GSM modem LP040 code: BP12
Communication cable for GSM modem code: QMS2901	Transducer USB/RS232 complete code: MP006	Self Adhesive Dual Lock code: MD036
Wall holder for GPRS modem code: MP036	DIN Rail 35mm holder for GPRS modem code: MP037	One time fee for using M2M server - applied for each data logger with modem code: SLU302

Start/stop magnet code: LP004	USB adapter code: LP003	COM adapter with protection IP65 code: LP012
LAN adapter with 0.5 meter cable code: LP005	LAN adapter with 5 meter cable code: LP005-5	Lithium battery 3,6V/AA code: A4203
wall holder for datalogger code: F9000	Self Adhesive Dual Lock code: MD036	9pin female connector for signal connection, IP67 protection code: K0921
9pin female connector for S3541,S50x1,S60x1 signal connection code: K0925	Connection adapter for loggers code: K0945

DBL Logger Program - database software for Sxxxx, Rxxxx, Gxxxx data loggers

code: DBL

DBV Database Viewer for database programs DBL, DBM, DBS

code: DBV

Program for Data Loggers Sxxxx, Rxxxx, Gxxxx, Dxxxx

code: SWR004

	DBL Logger Program - database software for Sxxxx, Rxxxx, Gxxxx data loggers code: DBL Database program package.
	DBV Database Viewer for database programs DBL, DBM, DBS code: DBV Low cost browser DBV Database Viewer enables several clients to view database from different places on network/internet.
	Program for Data Loggers Sxxxx, Rxxxx, Gxxxx, Dxxxx code: SWR004 Program for Windows for data loggers of Rxxxx, Sxxxx, Gxxxx, Dxxxx, ZV families.
	LAN adapter with 0.5 meter cable code: LP005 LAN adapter - external converter for Sxxxx, Rxxxx loggers communication with the PC via Ethernet, including ac/dc adapter 100 to 240Vac/5Vdc. Length of the cable 0.5 m. Protection IP65. Exceeding of adjusted limits is alarmed by sending e-mail message or SNMP trap.
	0-20mA current datalogger with display code: S6011 Data logger is designed for record of current. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.
	dual chann. 0-5V voltage datalogger with display code: S5021 Data logger is designed for record of voltage. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.