Temperature probes with thermocouple K (NiCr-Ni) for data loggers MS5D, MS5
Wire probes for gases, fluids, surfaces, lengths 1m, 2m, 3m, 4m.Measuring end is uninsulated weld of both wires.
Conductors are separately insulated and overall with another insulation.
Connection end - uninsulated wires for connection to data logger MS5D, MS5 input terminals.
Thermocouple tolerance : class 1 according to IEC584-2 +/-1.5°C or +/-0.004 x t (which is higher)
|
Type GD 260/0 -65 to +260°C extremely fast response wire probe, teflon insulated, outer cross section 0,5 x 0,8 mm. |
|
Type GD 700/0 -65 to +700°C duplex insulated - high temperature glass, outer cross section 1,4 x 2,3 mm. |
|
Type GD 1250/0 -65 to +980°C duplex insulated - Silica fibre, outer cross section 2,7 x 3,9 mm. |
|
SNP03/0 - Extension cable for type K thermocouples up to +200°C, outer cross section 1,7 x 3,0 mm. Available in lengths 1 to 15 m. Conductors are separately FEP insulated and overall with another FEP insulation. Connection end - uninsulated wires for connection to data logger MS5D, MS5 input terminals, oposite side - subminiature female connector for K thermocouple. Any K thermocouple probe with subminature male connector is connectable to the extension cable. Available probes. |
|
Subminiature male and female connectors for thermocouples J, K, S up to +200°C. Please specify the thermocouple type. |
|
SNP04 - Selfadhesive labels 25x40 mm for fixing the wire probe to the surface, temperature -70 to 260°C, set of 20 pieces. |