Temperature probes with Pt1000
with Cinch male connector

for T-PRINT G0221 and thermometers D0211, D0221, D0241

Unless otherwise indicated probes use sensor tolerance
t=±(0.15+0.002*|t|) - class A in accordance with IEC751.

photo of probe Pt1000TR160
type Pt1000TR160/C - low cost multi-purpose watertight (IP67) probe -30 to +80°C.
Tolerance t=±(0.30+0.005*|t|) - class B in accordance with IEC751.
Polyamide enclosure with shielded PVC cable of specified length.
Enclosure diameter 6mm, length 20mm.
Diameter of the cable 3.5mm.
Cable lengths 1,2,5,10,15 or 20 meters available.
Time response t50 < 12s, t90 < 32s, measured in fluid.

photo of probe Pt1000TGL40
type Pt1000TGL40/C - low cost multi-purpose watertight (IP67) probe -30 to +80°C, stainless steel 17241 with PVC cable of specified length. Diameter 5.7mm, length 40mm. Cable lengths 1,2,5 or 10 meters available.
Time response t63<10s, t95<30s, measured in fluid.
Time response t63<60s, t95<150s, measured in airflow 1m/s.


photo of probe Pt1000TG8
type Pt1000TG8/C - multi-purpose watertight (IP67) probe -80 to +200°C, stainless steel 17241 with silicone cable of specified length. Diameter 5.7mm, length 40mm. Cable lengths 1,2,5 or 10 meters available.
Time response t63<10s, t95<30s, measured in fluid.
Time response t63<60s, t95<150s, measured in airflow 1m/s.


Image


Image
type Pt1000TR050/C - multi-purpose probe e.g. for dryers, soldering machines etc. Measuring range -30°C to 350°C, short term up to 400°C. Cable with metal shielding is resistant up to 400°C. Cable lengths 1,2,5 or 10 meters available. Probe is not resistant against moisture.

photo of probe 200-80/C

type 200-80/C Fast accurate air probe -30 to +80°C for direct insertion to the connector of Commeter D0211,D0221,D0241.
Tolerance t=±(0.10+0.0017*|t|) - class Y in accordance with IEC751.
Response time: t63 < 10s, t95 < 30s (air flow 1m/s).
Probe is not resistant against moisture.

Image

type Pt1000TG7/C - brass surface probe with cable of specified length, range from -30 to +200°C. Diameter 18mm, width 6.5mm. Mounting by a M4 srew or fixing by a self adhesive tape. Cable lengths 1,2,5 or 10 meters available. Probe is not resistant against moisture.



probe 2021-150


probe 2021-150



probe 2021-150

type 2021-150/C - multi purpose probe -30 to +150°C with 1 meter cable. Probe is not resistant against moisture.

probe 2301-220 photo of probe 2301-220

type 2301-220/C - hand held pointed tip probe -30 to +220°C with 1 meter cable. Probe is not resistant against moisture. Time response t63<10s, t95<30s, measured in fluid.

probe 2061-250

photo of probe 2061-250

type 2061-200/C - hand-held pointed tip probe -30 to +200°C, stainless steel 17241 for food industry with teflon handle and silicon cable 1 meter, IP67. Time response t63<7s, t95<15s, measured in fluid.

Photo of probe 2091-200


Probe 2091-200

Hand-held pointed tip probe -30 to +200°C, stainless steel 17240 with LCP handle and silicone cable 1 meter. Protection IP67.
type 2091-200/C - cable with Cinch male connector

Photo of probe 2071 Probe 2071

Special pointed tip probe -30 to +80°C for food industry, stainless steel 17240 with silicon cable 1 meter. Protection IP67. For temperature measurement of the inside of frozen food.
type 2071-80/C - cable with Cinch male connector

Photo of probe PTS380K Probe PTS380K

Food industry probe -30 to +200°C for temperature measurement of fluids and gases, stainless steel 17240. Protection IP67.
Ambient temperature near the head -30 to +100°C.
Available also with connection cable with connector Lumberg RKT, length 5m.
type PTS380K/C - cable with Cinch male connector

probe 0031-150 photo of probe 2031-150

type 2031-150/C - direct surface probe -30 to +150°C with 1 meter cable. Probe is not resistant against moisture.
Tolerance t=±(0.30+0.005*|t|) - class B in accordance with IEC751.

temperature-probe

type PTS350A-2/C - surface probe for tubing and flat surface, range from -30 to +130°C, 2 meters cable, IP65